70mm Leatherette Ear Cushions

Replacement 70mm Sized Leatherette Cushions for Headphones and Headsets

For Round earpieces, measure the size of your earpiece from edge to edge to determine the headphone diameter.

The 70mm Leatherette Cushions are approximately 70mm (2 3/4 inches) across the diameter of the Cushion. They will fit onto an earpiece that is smaller than 70mm, between 61mm and 68mm (2 ½ to 2 11/16 inches). That's why you need to measure your earpiece size.

For Oval Shape earpieces, follow the instructions below to determine the average diameter by measuring the earpiece circumference:

  1. Remove the existing cushion from your headphone or headset, so you can see the part of the earpiece that your cushion will wrap around.
  2. Cut a thin strip of paper and wrap it around the outer edge of your earpiece, marking the paper at the point where it wraps around and meets the other end.
  3. Measure the length of that paper strip; That will be the circumference.
  4. Divide the circumference by 3.14 (known as "PI". So if you measured 8 ¼ inches, for example you divide 8.25 by 3.14 and the result will be 2.627 inches. That is the decimal equivalent to 2 ⅝ inches; That is the average diameter. Use the average diameter to decide which cushion will fit onto your earpiece.

lec70-cushion-on-headphone.png

The 70mm Leatherette Cushions (shown below) will fit onto an earpiece that is between 2 1/2 inches and 2 11/16 inches in diameter (or between 61mm and 68mm if you measured using a millimeter ruler). Select the LEC70 leatherette cushion below for additional details and to place your order. Click Here for a table of all the size info.  For more info on how to determine which earpad or cushion to order, click here.