60mm Leatherette Ear Cushions
Replacement 60mm Sized Leatherette Cushions for Headphones and Headsets
Measure the size of your earpiece from edge to edge to determine the headphone diameter
The 60mm Leatherette Cushions are approximately 60mm (2 ⅜ inches) across the diameter of the Cushion. They will fit onto an earpiece that is smaller than 60mm, between 53mm and 59mm (2 to 2 5/16 inches). That's why you need to measure your earpiece size.
Instructions on how to determine the diameter by measuring the earpiece circumference:
- Remove the existing cushion from your headphone or headset, so you can see the part of the earpiece that your cushion will wrap around
- Cut a thin strip of paper and wrap it around the outer edge of your earpiece, marking the paper at the point where it wraps around and meets the other end.
- Measure the length of that paper strip; That will be the circumference.
- Divide the circumference by 3.14 (known as "PI". So if you measured 7 inches, for example you divide 7 by 3.14 and the result will be 2.25 inches. That is the decimal equivalent to 2 ¼ inches; That is the average diameter. Use the average diameter to decide which cushion will fit onto your earpiece.
The LEC62 60mm Leatherette Cushions (see below) will fit onto an earpiece that is between 2 inches and 2 5/16 inches in diameter (or between 53mm and 59mm if you measured using a millimeter ruler). Select the 60mm cushion below for additional details and to place an order. Click Here for a table of all the size info. For more info on how to determine which earpad or cushion to order, click here.
There are no products listed under this category.