60mm Thin Foam Earpads

These are our Thin Style 60mm Foam Earpads

You can easily remove and replace the foam earpads on you headphone or headset earpieces. If your particular headphone earpieces had a thin style foam earpad, you might want to use the same type when replacing the earpads, especially if the headset was fitting comfortably to begin with. If your particular headphone was loose or uncomfortable to wear for long periods, then you might want to consider our thick foam earpads.

Before ordering replacement foam earpads, you should measure the diameter of your headphone earpiece, so you can look up the diameter on our website to make sure you are ordering the correct foam earpads. You want to base the measurements on your headphone earpiece without an earpad on the earpiece so that you accurately know the size of the earpad that will fit. We have based all our headphone earpad and cushion measurements on the sizing of the naked earpieces.

The 60mm foam earpads are approximately 60mm (2 3/8 inches) across when measuring the foam replacement Foam Earpads 

• INCH MEASUREMENT: The 60mm Foam Earpads will fit onto an earpiece that is between 1 3/4 inches and 2 1/8 inches in diameter.
• METRIC MEASUREMENT: The 60mm Foam Earpads will fit onto an earpiece that is between 44.5mm and 54mm in diameter

If your earpiece is oval shaped, you can wrap a string or thin strip of paper around the outer edge of the earpiece, then make a mark where the string comes around to meet the end of the string (or paper). Then measure the string (or paper) distance from the end to your mark and that distance will be the diameter of your earpiece. After you know the circumference, divide that number by 3.14 (known as "PI") to determine the earpiece diameter. If that value is between 1 3/4 inches and 2 1/8 inches, then the 60mm Earpad should fit your headphone. Click Here for a table of all the size info.  For more info on how to determine which earpad or cushion to order, click here.